s3_shk2.h

Go to the documentation of this file.

/* $Id: s3_shk2.h,v 1.2 1998/12/07 18:12:39 ad Exp $ */
#include "hdfi.h"

struct sshshk2{
    uint32 sctime_readout;  /* first minor frame of readout cycle, */
                            /* 32 bit spacecraft clock time */
    float64 sctime_collection; /* time of the start of the first spin in the */
                               /* 5-spin cycle. sub-second resolution */

    uint32 QAC; /* number of missing minor frames in the 5-spin cycle  */

    uint8 HKSECTOR; /* Housekeeping Sector    */
    uint8 FILL1;    /* Fill Time PC 1  */
    uint8 FILL2;    /* Fill Time PC 2  */
    uint8 FILL3;    /* Fill Time PC 3  */
    uint8 POWERS;   /* Power Status    */
    uint8 RELAYS;   /* Relay Status    */
    uint8 OVERI;    /* Over Currents    */
    uint8 P15LIM;   /* +15V Current Limit   */
    uint8 M15LIM;   /* -15V Current Limit   */
    uint8 P5LIM;    /* +5V Current Limit   */
    uint8 M5LIM;    /* -5V Current Limit   */
    uint8 _30KSTATH;    /* 30kV Discharge    */
    uint8 _30KSET;  /* 30kV Set Value   */
    uint8 _30KSTATL;    /* 30kV Plug Status   */
    uint8 _2KASTATH;    /* 2kV A Discharge   */
    uint8 _2KASET;  /* 2kV A Set Value  */
    uint8 _2KASTATL;    /* 2kV A Plug Status  */
    uint8 _2KBSTATH;    /* 2kV B Discharge   */
    uint8 _2KBSET;  /* 2kV B Set Value  */
    uint8 _2KBSTATL;    /* 2kV B Plug Status  */
    uint8 _2KCSTATH;    /* 2kV C Discharge   */
    uint8 _2KCSET;  /* 2kV C Set Value  */
    uint8 _2KCSTATL;    /* 2kV C Plug Status  */
    uint8 _75STATH; /* 75V Discharge    */
    uint8 _75SET;   /* 75V Set Value   */
    uint8 _75STATL; /* 75V Plug Status   */
    uint16 PC1P;    /* PC 1 Pres.   */
    uint16 PC2P;    /* PC 2 Pres.   */
    uint16 PC3P;    /* PC 3 Pres.   */
    uint16 LINEP;   /* line Pres.    */
    uint8 PC1O; /* PC 1 On/Off   */
    uint8 PC2O; /* PC 2 On/Off   */
    uint8 PC3O; /* PC 3 On/Off   */
    uint8 ALARMS;   /* Alarm Flags    */
};